A computerized NC control system with a more user-friendly design is used in the 3-in-1 decoiler straightener feeder. It is appropriate for feeding and straightening a variety of metal sheets; this particular machine is primarily used for materials with a thickness of 0.6 to 6.0 mm, and the stick system typically uses 7 The appropriate material can be as wide as 2000mm.
A computerized NC control system with a more user-friendly design is used in the 3-in-1 decoiler straightener feeder. It is appropriate for feeding and straightening a variety of metal sheets; this particular coil feeding line is primarily used for materials with a thickness of 0.6 to 6.0 mm. The straightening system typically uses 7 rollers, and the appropriate material can be as wide as 2000mm. In the die, there is no need for manual feeding, saving labor and enhancing safety. It is appropriate for continuous processing in your stamping line for diverse hardware, electronics, electrical appliances, molds, and auto parts.
A hydraulic pressing mechanism equipped with a gear-reduction motor to assist material feed during operation of the Decoilers, ensuring stable decoiling of coils across a range of thicknesses.
An oil-hydraulic support arm that facilitates loading, guiding, and entry of the strip into the system.
Two sets of through-beam sensors manage the material arc. When the strip reaches the first sensor, the Decoilers slow down; upon reaching the second, they stop—achieving fully automated, variable-frequency speed control during decoiling.
The coil rack employs a pneumatic disc-brake system, offering reliable braking performance and preventing coil unwinding from inertia during stops.
A dual-rod clamping hydraulic feeding structure, where a hydraulic motor—via a reducer—drives upper and lower clamping rollers to grip the strip head and feed it into the main unit of the Straighteners and Feeders.
Four worm-and-worm-gear assemblies provide adjustment. Rotating the handwheel turns the worm, which drives the gears and lifts the upper slide block, allowing precise control of the strip's entry pressure.
✓ Raw Material Type: Hot-Rolled Steel, Cold-Rolled Steel, Galvanized Steel, Stainless Steel, etc.
✓ Coil Width: 70mm – 400/ 600/ 800/ 1000/ 1300 mm
✓ Material Thickness: 0.6-6.0 mm
✓ Yield Strength: ≤245 N/mm2
✓ Tensile Strength: ≤392 N/mm2
✓ Working Speed: 0-22m/min
Combined decoiler straightener feeder machine NCSF6 series is our best seller model in the compact line. It's widely used in automotive parts stamping, and white goods production, making it one of the most reliable press feed lines and an ideal choice for heavy gauge coil feeding lines applications.
| Model | NCSF6-400 | NCSF6-600 | NCSF6-800 | NCSF6-1000 | NCSF6-1300 | ||||
|---|---|---|---|---|---|---|---|---|---|
| Width | 70～400 | 70～600 | 70～800 | 70～1000 | 70～1300 | ||||
| Thickness | 0.6～6.0 | ||||||||
| Load Capacity | 5 | 5 | 7 | 5 | 7 | 7 | 10 | 7 | 10 |
| Coil ID | ￠508 | ||||||||
| Coil OD | ￠900～1400 | ||||||||
| Discharge Speed | 16 | ||||||||
| Infeed Rollers | ￠84×2Rollers | ||||||||
| Leveling Rollers | ￠68×7Rollers (Top 4/Bottom 3) | ||||||||
| Feeding Rollers | ￠84×2Rollers | ||||||||
| Accuracy | ±0.2mm at 500mm Feed | ||||||||
| Air Pressure | 0.5～0.7 | ||||||||
| Coil Expansion | Hydraulic Expansion | ||||||||
| Servo Motor | AC5.5 | AC5.5 | AC7.5 | AC7.5 | AC11 | ||||
| Decoiler Motor | 2.2 | 2.2 | 3.7 | 2.2 | 3.7 | 3.7 | 5.5 | 3.7 | 5.5 |
Automotive
Manufacture of equipment for metal stamping of automotive parts. Structural car body parts and other parts like front brackets, brake pads, wipers, seat supports, electrical windows, exhaust pipes, catalytic converters, radiators, levers, pedals, gear box parts, wheels, damping supports, etc.
Building & Household
Feeding lines to produce a variety of metal components for the building and household sector and derivatives. Parts like braces, clamps, straps, locks and hinges for doors, furniture hardware, knives, cooking ware carpentry parts, metal supports, perforated plates, etc.
Home Appliance & Electronics
Installations for the manufacture of parts for household appliances sector or white goods. Metal pieces like motor housings, doors, electric cabinet, shells and covers, trays, guides, caps, supports, brackets, handles, etc.
Illumination
Many solutions for the blanking of metal parts for lighting sector. Several parts such as housings, panels, brackets, feet, arms, buttons, diffusers, etc.
Share your production requirements and material specifications. Our engineers will provide a tailored press automation solution with fast quotations and professional technical support.
Whatsapp: +86-18932396111
E-mail: czjinzhide@163.com
Address:
Phone:0086-18932396111
